• Diamond PCD Helical
    Compression Router Bits

  • Applications

    • For machining natural or man-made laminated substrate material: MDF, particle board, Formica┬«, melamine, paper, vinyl, etc
    • Works well with non-laminated material for minimum chipping and tear-out of the top and bottom surfaces

    Advantages

    • The helical design facilitates single contact cutting for reduced pressures and less required horsepower than other router bits
    • Combined up/down shear cutting generates cutting forces towards the center of the material, for reduced chipping and splintering
    • Increased feed rates for better productivity and reduced overall costs
    Technical Information
    • Made from Polycrystaline Diamond for man-made material and can be sharpened
    • The plunge point is carbide tipped for short or nominal plunge rout applications
    • All tools are right-hand bits unless otherwise specified.
      Left-hand router bits are available upon request

Part No. Cutting
Diameter
Cutting Edge
Length
Shank Size Overall Length No. of Flutes
RN261 1/2" 1-1/8" 1/2" 3.38" 1+1
RN262LH 1/2" 1-1/8" 1/2" 3.38" 1+1
RN265 1/2" 1-3/8" 1/2" 3.63" 1+1
RN271 5/8" 1-1/8" 1/2" 3.25" 1+1
RN275 5/8" 1-3/8" 3/4" 4.00" 1+1
RN281 3/4" 1-1/8" 3/4" 3.25" 1+1
RN285 3/4" 1-3/8" 3/4" 4.00" 1+1
RN291 3/4" 1-3/4" 3/4" 4.38" 1+1
RN211 1/2" 1" 1/2" 3.30" 1+1
RN214 1/2" 1-1/4" 1/2" 3.30" 1+1
RN217 5/8" 1" 5/8" 3.37" 1+1
RN218 5/8" 1-1/4" 5/8" 3.37" 1+1
RN219 3/4" 1" 3/4" 3.55" 1+1
RN223 3/4" 1-1/4" 3/4" 3.55" 1+1
RN226 3/4" 1-5/8" 3/4" 3.92" 1+1
RN232 5/8" 1" 5/8" 3.37" 2+2
RN237 5/8" 1-1/4" 5/8" 3.37" 2+2
RN242 3/4" 1" 3/4" 3.55" 2+2
RN224 3/4" 1-1/4" 3/4" 3.55" 2+2
RN247 3/4" 1-5/8" 3/4" 3.55" 2+2