• Two Flute Chipbreaker Router Bits

    Finisher Compression Spirals

    2 flute downcut Spiral

    All measurements are in inches unless otherwise specified.

  • Material: Feed Rates
    • Softwoods: 400-1500 IPM
    • Hardwoods: 400-1200 IPM
    • Softwood Plywood: 400-1400 IPM
    • Hardwood Plywood: 400-1200 IPM
    • Laminated Plywood:
      400-1200 IPM
    • Raw MDF & Particleboard:
      400-1000 IPM
    • Laminated Particleboard
      & MDF: 400-1400 IPM
    Finish Quality
    • Optimized for excellent top finish

Part No. Hole Diameter Edge Length Shank Size Overall Length Helix Angle
RS539 3/8 7/8 3/8 3 30˚
RS540 3/8 1-1/8 3/8 3 30˚
RS549 1/2 1-7/8 1/2 3 30˚
RS541 1/2 1 1/2 3 30˚
RS542 1/2 1-1/8 1/2 3 30˚
RS543 1/2 1-3/8 1/2 3-1/2 30˚
RS544 1/2 1-5/8 1/2 4 30˚
RS545 5/8 2-1/4 5/8 5 30˚
RS546 3/4 1-7/8 3/4 4 30˚