• Two Flute Compression Router Bits

    For Standard Cutting

    2 flute Compression Router Bits

    All measurements are in inches unless otherwise specified.

  • Material: Feed Rates
    • Softwoods: 400-1200 IPM
    • Hardwoods: 400-1000 IPM
    • Softwood Plywood: 400-1200 IPM
    • Hardwood Plywood: 400-1000 IPM
    • Laminated Plywood:
      400-1000 IPM
    • Raw MDF & Particleboard:
      400-800 IPM
    • Laminated Particleboard
      & MDF: 400-1200 IPM
    Finish Quality
    • Optimized for excellent finish on top & bottom.

Part No. Hole Diameter Edge Length Shank Size Overall Length Helix Angle
RS260 1/4 7/8 1/4 2-1/2 30˚
RS291 3/8 1-1/8 3/8 3 30˚
RS212 3/8 1-1/4 3/8 3 30˚
RS290 1/2 1 1/2 3 30˚
RS293 1/2 1-1/8 1/2 3 30˚
RS213 1/2 1-5/16 1/2 3 30˚
RS292 1/2 1-3/8 1/2 3-1/2 30˚
RS295 1/2 1-5/8 1/2 4 30˚
RS298 5/8 1-5/8 5/8 4 30˚
RS294 5/8 2-1/4 5/8 5 30˚
RS297 3/4 1-7/8 3/4 4 30˚
RS215 3/4 2 3/4 4 30˚
RS270 3/4 2-1/2 3/4 5 30˚


  • Two Flute Compression Router Bits

    For High Wear Cutting

  • Material: Feed Rates
    • Raw MDF & Particleboard: 400-800 IPM
    • Laminated Particleboard & MDF: 400-1200 IPM
    Finish Quality
    • Optimized for excellent finish on top & bottom.

Part No. Hole Diameter Edge Length Shank Size Overall Length Helix Angle
RS911* 3/8 7/8 3/8 3 30˚
RS915* 1/2 7/8 1/2 3 30˚
RS917 1/2 1-1/4 1/2 3 30˚
RS919 1/2 1-3/8 1/2 3-1/2 30˚
RS921 1/2 1-5/8 1/2 3-1/2 30˚