• Three Flute Compression Router Bits

    2 flute downcut Spiral

    All measurements are in inches unless otherwise specified.

  • Material: Feed Rates
    • Softwoods: 500-1600 IPM
    • Hardwoods: 500-1500 IPM
    • Softwood Plywood: 700-1800 IPM
    • Hardwood Plywood: 700-1600 IPM
    • Laminated Plywood:
      700-1600 IPM
    • Raw MDF & Particleboard:
      600-1200 IPM
    • Laminated Particleboard
      & MDF: 700-1800 IPM
    Finish Quality
    • Optimized for excellent finish on top & bottom.

Part No. Hole Diameter Edge Length Shank Size Overall Length Helix Angle
RS510 3/8 1-1/8 3/8 3 30˚
RS511 1/2 1-1/8 1/2 3 30˚
RS512 1/2 1-5/8 1/2 3-1/2 30˚
RS513 3/4 2 3/4 4 30˚