• Two Flute Downcut Router Bits

    2 flute downcut Spiral

    All measurements are in inches unless otherwise specified.

  • Material: Feed Rates
    • Softwoods: 200-450 IPM
    • Hardwoods: 200-400 IPM
    • Solid Surface: 150-200 IPM
    • Soft Ductile Plastics: 200 IPM
    • Raw MDF & Particleboard: 200-450 IPM
    End Point: Finish Quality
    • End Point Style: Plunge Point
    • Optimized for excellent top finish

Part No. Hole Diameter Edge Length Shank Size Overall Length Helix Angle
RS179Q 1/8 1/2 1/4 2 30˚
RS181L 1/8 1/2 1/4 2 30˚
RS180 1/8 1/2 1/8 2 30˚
RS182 5/32 1/2 1/4 2-1/2 30˚
RS183 5/32 5/8 1/4 2 30˚
RS184 3/16 3/4 3/16 2 30˚
RS186 3/16 3/4 1/4 2 30˚
RS187L 3/16 3/4 1/4 2 30˚
RS188 3/16 3/4 1/4   2-1/2 30˚
RS189 7/32 3/4 1/4 2-1/2 30˚
RS191 7/32 1 1/4 2-1/2 30˚
RS192 1/4 7/8 1/4 2-1/2 30˚
RS195 1/4 1 1/4 2-12 30˚
RS196L 1/4 1 1/4 2-1/2 30˚
RS198 1/4 1-1/8 1/4 3 30˚
RS199 9/32 1 5/16 2-1/2 30˚
RS211 5/16 1-1/8 5/16 3 30˚
RS214 5/16 1-1/4 5/16 3 30˚
RS217 5/16 1-1/8 1/2 3 30˚
RS216L 5/16 1-1/8 1/2 3 30˚
RS218 3/8 1 3/8 3 30˚
RS219 3/8 1-1/8 3/8 3 30˚
RS223 3/8 1-1/4 3/8 3 30˚
RS224L 3/8 1-1/4 3/8 3 30˚
RS226 3/8 1-1/4 1/2 3 30˚
RS227 7/16 1 1/2 3 30˚
RS228 1/2 1-1/8 1/2 3 30˚
RS229 1/2 1-1/4 1/2 3-1/2 30˚
RS232 1/2 1-5/8 1/2 3-1/2 30˚
RS233L 1/2 1-5/8 1/2 3-1/2 30˚
RS235 1/2 2-1/8 1/2 4 30˚
RS236 17/32 1-1/8 1/2 3 30˚
RS238 5/8 1-5/8 5/8 3-1/2 30˚
RS241 5/8 2-1/8 5/8 4 30˚
RS242L 5/8 2-1/8 5/8 4 30˚
RS244 3/4 1-5/8 3/4 4 30˚
RS247 3/4 2-1/8 3/4 4 30˚
RS248L 3/4 2-1/8 3/4 4 30˚
RS249 1 3 1 6 30˚