-
Four Flute Hybrid Router Bits
Rougher/Finisher Compression Spirals
All measurements are in inches unless otherwise specified.
-
Material: Feed Rates
- Softwoods: 1000-1800 IPM
- Hardwoods: 1000-1800 IPM
- Softwood Plywood: 1200-3000 IPM
- Hardwood Plywood: 1200-2800 IPM
- Laminated Plywood:
1200-2800 IPM - Raw MDF & Particleboard:
1000-2000 IPM - Laminated Particleboard
& MDF: 1200-3000 IPM
Finish Quality
- Optimized for excellent top & bottom finish
| Part No. | Hole Diameter | Edge Length | Shank Size | Overall Length | Helix Angle |
| RS989 | 1/2 | 1 | 1/2 | 3 | 30˚ |
| RS991 | 1/2 | 1-1/8 | 1/2 | 3 | 30˚ |
| RS993 | 1/2 | 1-3/8 | 1/2 | 3-1/2 | 30˚ |
| RS995 | 1/2 | 1-5/8 | 1/2 | 4 | 30˚ |
| RS997 | 5/8 | 2-1/4 | 5/8 | 5 | 30˚ |
| RS998 | 3/4 | 1-7/8 | 3/4 | 4 | 30˚ |
| RS999 | 3/4 | 2-1/2 | 3/4 | 5 | 30˚ |
Rougher/Finisher Hybrid = flutes with chipbreaker design (180°apart) and 2 flutes with a standard (straight) design (180°apart).