-
Two Flute "O" Straight Cut
For cutting hard plastics
All measurements are in inches unless otherwise specified.
-
Material: Feed Rates
- Hard Brittle Plastics: 250 IPM
- Soild Surface: 150-200 IPM
- Fiber Reinforced Plastics: 150 IPM
End Point: Finish Quality
- End Point Style: End Mill
- Optimized for excellent
top & bottom finish
Part No. | Hole Diameter | Edge Length | Shank Size | Overall Length |
RS570 | 1/8 | 1/4 | 1/4 | 2 |
RS571 | 3/16 | 3/8 | 1/4 | 2 |
RS572 | 3/16 | 5/8 | 1/4 | 2 |
RS573L | 3/16 | 5/8 | 1/4 | 2 |
RS574 | 3/16 | 5/8 | 1/4 | 4 |
RS575 | 1/4 | 3/8 | 1/4 | 2-1/2 |
RS576 | 1/4 | 3/4 | 1/4 | 2-1/2 |
RS577L | 1/4 | 3/4 | 1/4 | 2-1/2 |
RS578 | 1/4 | 1-1/4 | 1/4 | 4 |
RS579 | 3/8 | 5/8 | 3/8 | 2-1/2 |
RS580 | 3/8 | 7/8 | 3/8 | 2-1/2 |
RS581L | 3/8 | 7/8 | 3/8 | 2-1/2 |
RS582 | 3/8 | 1-5/8 | 3/8 | 6 |
RS583 | 1/2 | 1 | 1/2 | 3 |
RS584L | 1/2 | 1 | 1/2 | 3 |
RS585 | 1/2 | 2-1/8 | 1/2 | 6 |